Gardening Pleasures

 

REPLACEMENT TUNGSTEN BLADES FOR ALL ACCUSHARP SHARPENERS (EXCEPT SHEAR SHARP). REPLACE CUTS

 

These blades fit all of our products except ShearSharp. We use only the finest American Made carbide available, and Diamond Hone it to a mirror finish for the best possible sharpening edge.

 

The result is the finest line of carbide sharpeners on the market today, at any price! these blades are reversible for double life and most users report an average life of 5-10 years between replacements. Beware of other brands that use cheap imported carbide! Insist on AccuSharp!

KWJSHARP. TUNGSTEN CARBIDE REPLACEMENT BLADES

 
To replace the blades in your ACCUSharp® Knife and Tool Sharpener simply remove 3 screws and separate the 2 halves. Remove old blades and install new blades. NOTE: The new blades have a dot on 1 face. This dot must face the finger guard for the sharpener to work properly.

 
Replace finger guard and 3 screws. If finger guard is broken or missing write to manufacturer for free replacement guard,

 
CAUTION: DO NOT REASSEMBLE THE SHARPENER WITHOUT THE FINGER GUARD. SERIOUS INJURY MAY RESULT.

To replace the blades in your ACCUSharp® SturdyMount Knife Sharpener simply remove the mounting screws and then the center screw. Remove the hold down cap. Remove old blades and install new blades.

NOTE: The new blades have a dot on 1 face.

Keep both reference dots facing the front of the sharpener during installation. Replace hold down cap, center screw
and re-mount using mounting screws.

 
SAFETY WARNING: IF AT ANY TIME YOU SEE ANY BREAKS OR CRACKS IN THE SHARPENER, DO NOT CONTINUE
TO USE IT. EITHER DISCARD IT OR RETURN IT UNDER THE ______ TERMS OF THE WARRANTY.